Double Door Autoclave Steam Sterilizer Equipments

• Theory: Pressure Steam
• Type: Pressure Steam Sterilization Equipments
• Certification: ISO13485
• Transport Package: Wooden Carton
• Trademark: SD
• Origin: China
• HS Code: 8419200000
• Production Capacity: 300units/Month

Product Description

WG Series Pulse Vacuum Autoclave

WG series pulsating vacuum sterilizer uses saturated steam as sterilization medium, and releases a large amount of latent heat and humidity when the saturated steam condenses, so that the articles to be sterilized are in high temperature and moist state, and after a period of heat preservation, the sterilization purpose is achieved. Pulsating vacuum exhaust was used to eliminate the influence of cold air on temperature. Finally, vacuum dehumidification combined with jacket drying was used to dry sterilized articles.
WG series pulsating vacuum sterilizer is mainly used for sterilization of medical instruments, dressings, rubber, officinal instruments, implantable instruments and liquids in hospital disinfection supply room, third party disinfection supply center and operating room.
 
Main Parameters and Utilities
 

Inner chamber design pressure	-0.1~0.3MPa	Opening pressure of inner chamber safety valve	0.28 MPa
Jacket design temperature	0.3Mpa	Opening pressure of jacket saety valve	0.28 Mpa
Design temperature	150ºC	Temperature control precision of sterilization temperature	0~2ºC
Max.working temperature	139ºC	Temperature uniformity	±1ºC
Max.working pressure	0.25MPa	Amplitude and times of vacuum pulsation	Amplitude -80~0Kpa, times 1~99
Vacuum leakage rate	≤0.13Kpa/min	Times of cross pressure pulsation	Amplitude -80~80Kpa, times 1
Limit vacuum	-97Kpa	Positive pressure pulsation times	1~3

Size & Utilities

Model	Tank size		Volume (L)	Dimensions L×W×H(mm)	Weight (Kg)	Steam consumption (kg/C)	Water Consumption(kg/C)	Power supply	Power
	W×H (mm)	Depth (mm)
WG-0.25	550×550	850	255	1250×1280×1850	750	18	120	380v,50hz	2KW+24KW
WG-0.36	610× 610	1000	360	1300×1350×1850	850	22	180	380v,50hz	2KW+30KW
WG-0.6	610× 910	1200	600	1500×1440×1960	1250	35	320	380v,50hz	3KW+36KW
WG-0.8	610× 910	1500	800	1800×1440×1960	1350	47	400	380v,50hz	3.5KW+48KW
WG-1.2	680×1180	1500	1200	1800×1480×2000	1650	65	600	380v,50hz	3.5KW
WG-1.5	680×1180	1850	1500	2140×1480×2000	1850	80	750	380v,50hz	4KW
WG-2.0	900×1390	1620	2000	1970×1750×2200	2300	106	1000	380v,50hz	4.5KW
WG-2.5	900×1390	2050	2500	2350×1750×2200	2700	132	1250	380v,50hz	6KW
WG-3.0	900×1390	2400	3000	2700×1750×2200	3500	132	1250	380v,50hz	8KW

Structure and Characteristic of The Equipment
Body of the sterilizer:
 * It is designed and manufactured in accordance with GB/T 150 "the Pressure Vessel", GB 8599 "The Technical Requirements of Large Steam Sterilizer--Automatic Control Protocol", and TSG 21-2016 the "Safety and Technology Specification for Fixed Monitor Vessels" and related inspection procedures.
 * The main structure is a rectangular section, European ring stiffener jacket structure. The door sealing mode is pneumatic sealing, and the interlock of double doors fully meets the specification requirements.
 * The inner liner, door plate and other materials in contact with steam are S30408 stainless steel, the design life can reach 10 years, 20000 sterilization cycles (316L stainless steel is optional, the design life is 15 years, 30000 sterilization cycles), the front teeth and main block teeth are S30408 stainless steel, the jacket is made of high-quality Q245R, and the special material for pressure vessel is S30408.
* The equipment has standard GMP authentication interface.
Sterilizer piping system:
* 304 stainless steel sanitary pipeline, clamp type connection. German Gem-u angle seat pneumatic valve, Taiwan Yadeke solenoid valve and German speck direct connected water ring vacuum pump are adopted.
* (Optional) Intelligent automatic drainage system, water saving and noise reduction system and pipeline insulation treatment.
Sterilizer control system:
* It adopts imported Siemens programmable controller PLC and color touch screen at the operation end; the printer can print the process data of each stage in real time; various safety and alarm systems are adopted.
* It has a communication interface connected with the quality traceability system of the disinfection and supply center. Intelligent maintenance system, (optional) remote monitoring and maintenance module.
* The compound pulsating process can eliminate indoor air more thoroughly, improve the fatigue life of the equipment and achieve good drying effect.
Details